Dimensions: 150x180x90h cm

Plint P150 laboratory benches are used for all kinds of laboratory works icluding analysis, testing, experimentation etc. The lower parts of the plint benches produced with storage cabinets and drawers but with knee spaces. Worktop of plith benches is placed on the under cabinets working as a carrier.

Laboratory Bench Working Surface: Can be changed upon request. Work surfaces that can be applied to our products;

Chemical Resistant Compact Laminate

It is one of the most preferred materials. It is a high performance product. It has good chemical resistance. Heat, scratch and impact resistance is very high. However, if cleaning is not taken care of, chemicals may leave stains over time. Stains do not have a disadvantage to use, but black color can be preferred to avoid this aesthetically.

Stoneware

Industrial ceramics are produced in one piece without joints. Chemical resistance is very high. Resistant to all known chemicals except hydrogen fluoride and its solutions. Very high heat and scratch resistance. Impact resistance is not good. Thicknesses of 10-22-26mm are applied with or without barrier. It can be produced together with cupsink (drip cup) sink from its own material for fume cupboards.

Polipropylene

Polypropylene plastic sheet is made of 8 to 10 mm thick and can be applied as baseboard. Acid and base resistance is very high. Impact resistance is very good. Although it is more suitable than ceramic alternative in price, it has low scratch and heat resistance.

Laboratory Bench Shelf System: Can be changed upon request. Shelf systems applicable to our products;

Box Section Shelf System:

This system has box section shaped towers and MDF board shelves. Electrical and data sockets can be installed on the towers if needed.

Profile Shelf System:

In this system there are shelves hanging on strut profiles. Under the shelves, electric ducts icluding power and data sockets can be installed if needed.