Standard Dimensions: 150x75x160h

They are ergonomic tables that ensure that all kinds of work (analysis, experiment, etc.) in laboratories, workshops and technical service environments are done safely. The table is manufactured with lighting and a storage shelf.

Carrier System: It consists of an anodized aluminum construction leg system.

Table working surface: It can be changed upon request. In general, there are 3 options as MDF lam, laminate and compact laminate. If MDF lam is preferred, if the countertop surface is preferred, laminate coated chipboard can be applied in 18 or 30 mm thickness. Its resistance to scratching, water and heat is limited. The board edges are 2 mm PVC tape. If the countertop surface is compact laminate, its resistance to water, short-term heat and impacts is much higher.

Shelves: There is a double-deck shelf system. The height of the lower shelf can be adjusted. The shelf surfaces can be the same as the work surface or they can be selected differently.

AC power unit: There are 6x16A 220V 50hz mains sockets, 6x16A UPS sockets and 2 RJ45 data sockets on the plastic cable channel. The sockets are protected by automatic fuses. There is also an emergency stop button on the laboratory table with AC power unit to cut off the energy in case of emergency. There is a ground socket on the channel for the ESD cover.

Lighting: There is one 18W LED lamp placed under the first shelf on the laboratory table with AC power unit. The lighting can be turned on and off with the illuminated button.

Drawer: In this model, there is one telescopic rail drawer made of 18mm MDF laminate under the table. The drawer flap edges are PVC tape.

Keyboard shelf: This model has a telescopic rail keyboard shelf made of 18mm MDF laminate under the table. The keyboard shelf edges are PVC banded.

Foot support: This model has two galvanized steel foot supports under the table. The foot supports are electrostatic powder coated.