Dimensions: 180x75x75h

It is a table that enables all kinds of work done in laboratory environments (analysis, experiment, etc.) to be done safely in groups. The table is in rectangular form so that 3 student can sit at the same time and work individually or as a group.

Surface:May vary depending on request. Worktops that can be applied on this table;

Laminate

The long sides are made of soft forming and the short sides are made of 2mm PVC band. High quality laminate printing was made on 28mm thick chipboard. Acid and base resistance is very low. Impulse resistance is not good. It has less resistance to scratching and heat.

G-Lab

One of the most preferred materials. This product's price/performance ratio is quite high. It's chemical resistance is good enough. The resistance against heat, scratch and crush is very high. However, if you do not pay attention to cleanliness, the chemicals can leave stains over time. There is no disadvantage to using stains, but aesthetically it is possible to avoid this issue, black color can be preferred.

Industrial Ceramics

Industrial ceramics is a material that is produced in one piece without joints up to 2m. The chemical resistance is very high. Except for hydrogen fluoride and solutions, all known chemical resistance is very good. It is very resistant to heat and scratches. Impact strength is not good. It is not preferred too much because the cost and the term of term is much. Thicknesses of 10-22-26mm are applied as barrier or barrier free. It can be produced with its own material without the difference in level.