UV Sterilizer

It is a device that helps to sterilize the materials put in the UV Sterilizer by purifying them from micro-organisms.
Both the American Ashrae and the European Rehva associations stated that UV-C light is an important factor in the fight against the Covid-19 virus and recommended its use where necessary.

In the Air Conditioning Technical Board, which was established jointly by all air conditioning associations under the chairmanship of the MMO (Chamber of Mechanical Engineers), it recommends the use of UV-C light-containing methods as an additional precaution against Covid-19.

Dimensions: 60x40x40h

The UV sterilizer has a sealed UV filter cover. There is a digital programmer panel at the top. Even if the UV light is opened without closing the cover, it will not activate. The cabinet of the UV sterilizer is epoxy-based electrostatic powder painted on galvanized steel. The metal cabinet is permanently grounded. Total power 78W. It has the largest interior volume compared to many equivalent products.

Especially mobile phones, mice and keyboards, keys, dental tools, barber scissors, etc., which are exposed to daily frequent use. Ideal for sterilizing materials. Viruses, bacteria, fungi, parasites etc. It is recommended that masks in FFP1 and N95 standards, which are used against pathogens, are kept in the sterilizer before reuse or sterilized in the cabin before being thrown away. 8 masks can be sterilized at the same time with the UVS 6078-RDT sterilizer. It provides sterilization by producing UV rays and ozone gas adjusted at a certain wavelength. It can be operated by setting the desired time in seconds, minutes and hours via the digital panel on it. If you want, the working cycle (work for 15 seconds, stop for 20 seconds, etc.) can be adjusted.

Keeping hard and flat-surfaced objects in the sterilizer for 45 seconds is sufficient to be 97% sterile. UV fluorescent tubes are used instead of LED lamps with very limited light intensity and untested. UV rays are harmful to eyes and skin. Exposure to direct UV light should be avoided. Therefore, there is a safety on the cover. The lamps turn off automatically as soon as the door is opened. In this way, you can safely add and remove materials inside the cabinet.