Standard Dimensions: 120-150-180x75x220 (h) cm

A fume hood is typically a large piece of equipment that ensures a safety place which includes a ventilation system for users making their laboratory works, experiments and analyzes with chemicals.
The BrauLAB CDP model towers have vertical control panels on the right and left sides. This panel includes water and gas control valves and a digital display. You can control lighting, fan motor speed and the front sash position over the touch screen panel. There are also an electrical outlets on this panel to feed the external devices to be used in the cabin.

Fume Hood Body: It is made of 1.2mm galvanized steel and coated with epoxy polyester based electrostatic powder paint. In this regard, it has become extremely resistant to corrosion caused by chemical vapors.

Feume Hood Surface: May vary depending on request. Work surfaces that can be applied to our products;

G-Lab (compact sheet with anti-acid surface)

This material is one of the most preferred products. The price performance ratio is high. Its chemical resistance is good.It has high resistance to scratching and impact. However, if you do not pay attention to cleanliness, it can leave stains over time. There is no disadvantage to the use of stains, but aesthetically, black color can be preferred to avoid this.

Industrial Ceramics

Industrial ceramics is a material that is produced in one piece without joints. The chemical resistance is very high. Except for hydrogen fluoride and solutions, all known chemical resistance is very good. It is very resistant to heat and scratches. Impact strength is not good. It is not preferred too much because the cost and the term of term is much. Thicknesses of 10-22-26mm are applied as barrier or barrier free. For drawer furnaces, cupsink (drip cup) from its own material can be produced together with the sink.

Polypropylene

It is made of polypropylene plastic plate. It can be applied with a thickness of 8 to 10 mm and a skirting board. Acid and base resistance is very high. Impact resistance is very good. The price is more suitable than the ceramic alternative and it has low scratch and heat resistance.