CaseWork laboratory workbenches are suitable for all kinds of works (analysis, experiments, etc.) in laboratory environments . The lower part of the worktop can be produced for storage purposes with cupboard or seating spaces.
Carrier System: b> There are plastic feet under the cabinet carrying the cabinet and the worktop. These feet are covered with base covers.
Work Surface: b> Can be changed as desired. Work surfaces applicable to our products;
Anti Chemical Compact Laminate-Lab b> li> It is one of the most preferred materials. It is a solid core compact plate with anti-chemical top surface. Price performance rate is the highest product. Good chemical resistance. High resistance to scratches and impacts. It is resistant to heat for short periods up to 180 degrees. However, if you do not pay attention to the cleanliness of chemicals may cause matting and stains over time.
Industrial Ceramic b> li> Industrial ceramic is a material produced as a single piece without joints up to 2m. Chemical resistance is very high. It has very good resistance to all known chemicals except hydrogen fluoride and its solutions. It is very resistant to heat and scratching. Impact resistance is not good. Because of the cost and the duration of the term is not too much preferred. Thicknesses of 10-22-26mm are applied with or without barrier. It can be produced with its sink without any difference from its material.
Polypropylene b> li> Made of polypropylene plastic sheet. Acid and base strength is very high. Impact resistance is very good. Price is more suitable than ceramic alternative, but scratch and heat resistance is low.
Shelf System: b> Can be changed as desired. Shelf systems that can be applied to our products;
Mediacell Shelf System: b> li> This system has triangular towers and metal shelves positioned between them. Electrical and data sockets, gas and water taps can be mounted on the towers according to the need.
Profile Shelf System: b> li> This system has shelves hanging on profile posts. Under the shelves, electrical and data sockets can be installed in combination with the cable channel according to the need.