Standart Dimensions: 120x75x220(h) cm, 150x75x220(h) cm, 180x75x220(h) cm

BrauLAB FC-SDP series fume cupboards promise maximum safety when combined with superior extraction power, microprocessor-controlled digital panel and alarm system.

Fume Hood Body:

Made of 1.2 mm galvanized steel and coated with epoxy polyester based electrostatic powder paint. In this way, it has become resistant to corrosion.

Fume Hood Front Sash:

Made of 6mm heat treated tempered glass. Motorized automatic glass door can be opened and closed upwards and downwards with buttons.

Fume Hood Control Panel: There are flat type standard control panels on both sides of the fume hood. Since these panels are not below, they offer the user a closer working opportunity. In one of these panels there are gas and water valves, in the other, protection fuses, microprocessor-controlled control panel and display are positioned. The weather and winter speed can be followed instantly on the screen. When the air flow rate exceeds the standards (when it falls too low or too high), the visual and audible warning system works on the LCD screen. Lighting fan status can be followed on this screen. Fan speed can be increased or decreased according to demand or need.

Worktops of Fume Hood:

It can be changed upon request. Working surfaces that can be applied to our products;

Compact laminate resistant to chemicals)

This material is one of the most preferred products. It is a product with a high price-performance ratio. It is highly resistant to scratches and impacts. It is heat resistant up to 150 degrees. Its chemical resistance is good. However, if it is not cleaned carefully, it can leave stains over time. If necessary, compact laminate coating can be applied to the inner walls of the fume hood.

Stoneware

Industrial ceramic is a material produced as a single piece without any joints. The chemical resistance of ceramic stoneware fume hood worktops is very high. It is very resistant to all known chemicals except hydrogen fluoride and its solutions. It is very resistant to heat and scratches. Its impact resistance is limited. 12-18-25mm thicknesses are applied with or without a barrier. It can be produced with a cup sink (drip cup) from its own material for fume hoods. Ceramic coating can also be applied to the inner walls of the fume hood upon request.

Polypropylene

It is manufactured from polypropylene boards. It can be applied in 8 to 10 mm thickness and with skirting. Polypropylene fume hood countertop surface has very high acid and base resistance. Impact resistance is good. Scratch and heat resistance are low. If desired, PP coating can be applied to the inner walls of the fume hood.