Dimensions: 180x120x75h

It is a 3D printer cabinet that can be used in all kinds of STEM, maker and robotic workshops. It is an ideal desk for small desktop 3D printers and require continuous work. It is very easy to use whith the internal electric power unit for 3D printers. Also a notebook can be placed on top beside the printer.

Body:18mm melamine laminated MDF, 2mm PVC edgebanding with different color.

Working surface: All sides are 2mm PVC banded. High quality melamine was made on 18mm thick MDF sheet. The back of the surface has a flap stock shelf. The shelf consists of a metal rod and support legs. When desired, the rod and the flap can be removed.

Electric Power Unit: There are 3 electric sockets IP44 220V 16A on 5x10cm cable ducts. At the head of the channel there is a lighted on / off switch.

Lower Cabinets and Shelves: A two-door storage area is available on the bottom of the 3D printer cabinet. There is one shelf inside. There are open shelves on the right and left sides of the cabinet. Scissors, modeling knife etc. used frequently with the 3D printer can be placed on these open shelves.